Fast and Friendly Floorcare

Carpet cleaning – we offer both dry cleaning and steam cleaning of carpets. Our cleaning starts with vacuuming the carpet, and ends with grooming the carpet so that it looks as best as possible.
- Our dry cleaning method – for light to moderate soil - uses a low moisture mild cleaning solution which is lightly sprayed onto the carpet; we then go over the carpet with a floor buffer using specially designed absorbent pads; the soil is gently wiped away and collected on the pads - dries in 1 hour.
- Our steam cleaning method – for light to heavy soil – uses a mild cleaning solution combined with hot water which is sprayed deep into the carpet and immediately extracted along with the soil – dries in 3 to 6 hours
Tile & Grout cleaning and sealing - Our cleaning service restores ceramic and porcelain tile and grout to its original condition - in many cases. We spray a specially formulated cleaning solution over an area and allow it to dwell for a few minutes, and if necessary we hand scrub the grout lines, then, using the most modern equipment, water is sprayed at a high speed, in a circular motion only on the floor and recaptured all in one quick and easy motion, then sealer is applied and will be dry in about 1 hour. No mess, no splashing, no aching back and knees for you.
Marble, Terrazzo, Granite & Other Natural Stones – for natural stone floors we provide cleaning, sealing, diamond grinding, crystallizing, and lippage removal. Preserve the beauty of your natural stone floors, let our floor refinishing team grind and hone your terrazzo, marble, granite, limestone, slate and other natural stone floors to remove lippage, scratches and etches. We'll polish the surface to restore its original shine. We’ll finish the job with a tough sealer that will withstand penetration of water, oil and dirt.
Mexican Saltillo and Terracotta – to regain that beautiful, warm effect, these floors periodically need to be stripped, sealed and re-finished or if in relatively good condition, scrubbed and re-coated. Let our professionals restore your floor to its natural beauty.
Vinyl Tile (VCT) – Although vinyl floors can be extremely durable, they need proper maintenance to preserve their resilience and shine. Without proper maintenance, vinyl floors loose their shine, develop wax buildup, yellow discoloration, scratches and abrasions; and act like a magnet that attracts dirt. We provide stripping, sealing and waxing to restore the look of your floor. To keep your floors looking nice, we can provide regular maintenance which includes high speed buffing and periodic scrubbing and re-coating.
Hardwood – for hardwood floors that are worn or have nicks, scratches, and gouges we sand, seal and re-finish them; for floors that are just dull with little or no scratches we can screen and re-coat them. We use a dust containment system for sanding, which means no mess on your walls, ceilings, or in your ventilation system. We use only environmentally safe sealers and finishes. We can restore all types of wood floors including, softwood such as pine and hardwoods like oak, mahogany and ash; and laminate or engineered wood floors too.
Concrete – these shop or warehouse floors can be power-scrubbed and finished with chemical and stain resistant coatings that vastly improve their appearance and make them much easier to maintain.